Zhongtuo Roll Forming Machinery Co., ltd

 Industrial Load Pallet Storage Rack Shelf Panel Making Roll Forming Machine

Industrial Load Pallet Storage Rack Shelf Panel Making Roll Forming Machine

Industrial Load Pallet Storage Rack Shelf Panel Making Roll Forming Machine is designed to make the shelg panel in batch fully automatic.

Industrial Load Pallet Storage Rack Shelf Panel Making Roll Forming Machine

is consisted with auto decoiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioning and cutting section, collection table and electrical control system etc.
Equipment capacity                        
1, Equipment production capacity: width≤400mm, thickness of steel material: 1-2.5mm
2, Production speed: 8-15m/min
3, Total power: about 21.5kw
 
Take the following puplar Japanese Industrial Load Pallet Storage Rack Shelf Panel for example to show you how the machine is designed.


Main process parameters of the Industrial Load Pallet Storage Rack Shelf Panel Making Roll Forming Machine:
1. Maximum rolling thickness: 0.4-0.6 mm, using steel strip coil.
2, working speed: 0~6m/min
3, the total power of the unit: 7.5kw (power) 7.5kw (cut)
4, the total power of the whole machine: 20kw
5, the number of forming groups: about 20 groups
6, length accuracy: less than 1 meter: ± 0.5mm
Third, the main components of the production line

Production process: discharging rack...opening machine...punching...servo feeding...rolling forming part...hydraulic cutting (or bending at the same time)

What make our Industrial Load Pallet Storage Rack Shelf Panel Making Roll Forming Machine different?

Cold bending machine:
The main machine is 20 sets, cantilever structure, enclosed gear box, one side of the gear box is fixed type, the other side is sliding type (20 sets of overall servo movement), side plate hand movement telescopic 200-350, roll mold inner hole diameter 38mm, sliding adopts linear guide rail, and the inlet and outlet are provided with feeding guide and discharge guide.
(1) Drive motor: 7.5kw motor with 2 Mtk77 reducers.
(2) Roll material: GCr15.
(3) Rolling process: roughing - quenching - finishing - chrome plating, quenching hardness of 55-60.Inner hole and surface grinder are ground.
(4) Spindle material: 40Cr.
(5) Spindle process: quenching and tempering - lathe processing - fine grinding outer circle.
(6) The main machine adopts square tube welding and surface milling machine processing.
Hydraulic cut + hemming
Cutting + hemming is the last step of the unit, which can be cut and bent accurately at the required position under system control. The system consists of a hydraulic drive, a forming edge, a tool holder, and a hydraulic station. The machine bends once, and is positioned by the optical fiber and the encoder, and the bending is cut off in the stop state.

If you want to know more information about the rack making machine, please visit our other pages.

 

Email to this supplier

Your message must be between 20-8000 characters

Related Products List